Cobra Electronics 25 LX Manuel Du Propriétaire
PUSH &
HOLD
Setting Dynamike®
This controls the microphone sensitivity
(outgoing audio level).
(outgoing audio level).
To Transmit
13
To Transmit
12
Setting
Dynamike
®
Caution!
Be sure the antenna is properly
connected to the radio before
transmitting. Prolonged trans-
mitting without an antenna,
or a poorly matched antenna,
could cause damage to the
transmitter.
Be sure the antenna is properly
connected to the radio before
transmitting. Prolonged trans-
mitting without an antenna,
or a poorly matched antenna,
could cause damage to the
transmitter.
Be sure to read the F.C.C. Rules
and Regulations included with
this unit before transmitting.
and Regulations included with
this unit before transmitting.
Operation
Operation
3
Select desired channel.
1
Initially, set fully clockwise so that maximum
voice volume is available. Dynamike may
have to be reduced in some conditions.
voice volume is available. Dynamike may
have to be reduced in some conditions.
2
Transmit
Push and hold mic button to transmit.
Transmitter is now activated. When transmit-
ting, hold the microphone two inches from
your mouth and speak in a clear, normal voice.
Release to receive.
Transmitter is now activated. When transmit-
ting, hold the microphone two inches from
your mouth and speak in a clear, normal voice.
Release to receive.
SIG
+30dB
1
1
2 3 4 TX PWR
3
5 7 9
MEM
NB
TX
RX
VOL
SQ
OFF
DYNAMIKE
MIN
RF GAIN
MIN
MAX
M
EN
U PU
SH ENT
ER
SCAN / M SCAN
DIM / ESC
CB / PA
NB
CH9 / 19
SIG
+30dB
1
1
2 3 4 TX PWR
3
5 7 9
MEM
NB
TX
RX
VOL
SQ
OFF
DYNAMIKE
MIN
RF GAIN
MIN
MAX
M
EN
U PU
SH ENT
ER
SCAN / M SCAN
DIM / ESC
CB / PA
NB
CH9 / 19
25LX_MANL.indd 12-13
11/15/11 9:43 AM