Canon DP-V3010 Manuel D'Instructions
37
OSD Menu
Item
Setting Options (underline indicates factory default)
Gamma
Sets the Gamma.
2.2, 2.35, 2.4, 2.6, Canon Log to WideDR 1.1, Canon Log to DCI 1.2: Select a preset gamma.
"Canon Log to WideDR 1.1" supports "LUT (Look-up Table) for Canon Log Gamma and Canon Log
** to WideDR ** LUT Version 1.1"*.
"Canon Log to DCI 1.2" supports "LUT (Look-up Table) for Canon Log Gamma and Canon Log ** to
DCI (Gamma 2.6) ** LUT Version 1.2"*.
User LUT: When "User 1-7" or "Canon Log" is selected for "Picture Mode", load an external LUT
and configure.
2.2, 2.35, 2.4, 2.6, Canon Log to WideDR 1.1, Canon Log to DCI 1.2: Select a preset gamma.
"Canon Log to WideDR 1.1" supports "LUT (Look-up Table) for Canon Log Gamma and Canon Log
** to WideDR ** LUT Version 1.1"*.
"Canon Log to DCI 1.2" supports "LUT (Look-up Table) for Canon Log Gamma and Canon Log ** to
DCI (Gamma 2.6) ** LUT Version 1.2"*.
User LUT: When "User 1-7" or "Canon Log" is selected for "Picture Mode", load an external LUT
and configure.
*: Asterisk "**" indicates the bit count of LUT for the CINEMA EOS SYSTEM downloaded from Canon
website.
website.
Color Gamut
Color gamut can be selected when "User 1-7" or "Canon Log" is selected for "Picture Mode".
SMPTE-C, EBU, ITU-R BT.709, ITU-R BT.2020, Adobe RGB, DCI-P3: Color gamut compliant to
each standard.
Cinema Gamut to 709, Cinema Gamut to DCI, DCI-P3+ to 709, DCI-P3+ to DCI: Modes where
the color gamut is converted to monitor Cinema Gamut and DCI-P3+ video recorded by the EOS
C500/C500 PL of the CINEMA EOS SYSTEM.
Native: Color gamut that can be displayed by this video display.
User LUT: Sets by loading an external LUT.
SMPTE-C, EBU, ITU-R BT.709, ITU-R BT.2020, Adobe RGB, DCI-P3: Color gamut compliant to
each standard.
Cinema Gamut to 709, Cinema Gamut to DCI, DCI-P3+ to 709, DCI-P3+ to DCI: Modes where
the color gamut is converted to monitor Cinema Gamut and DCI-P3+ video recorded by the EOS
C500/C500 PL of the CINEMA EOS SYSTEM.
Native: Color gamut that can be displayed by this video display.
User LUT: Sets by loading an external LUT.
Note
• When "ITU-R BT.2020", "Cinema Gamut to 709", "Cinema Gamut to DCI", "DCI-P3+ to 709"
or "DCI-P3+ to DCI" is selected, color gamut is converted and displayed on the DP-V3010 as
shown below. All data outside of the color gamut after conversion will be lost.
shown below. All data outside of the color gamut after conversion will be lost.
Color gamut of input video
Color gamut after conversion
on the DP-V3010
on the DP-V3010
ITU-R BT.2020
Native
Cinema Gamut to 709
ITU-R BT.709
Cinema Gamut to DCI
DCI-P3
DCI-P3+ to 709
ITU-R BT.709
DCI-P3+ to DCI
DCI-P3
ODT
This is displayed instead of "Gamma" and "Color gamut" when "ACESproxy" is selected for "Picture
mode".
DCI-P3, ITU-R BT.709: ACESproxy is converted into respective mode.
mode".
DCI-P3, ITU-R BT.709: ACESproxy is converted into respective mode.
COP
Y