Canon DP-V3010 Manuel D'Instructions
44
OSD Menu
Marker Settings
This menu is used to configure various markers.
Item
Setting Options (underline indicates factory default)
Marker Preset
Customizes markers which are assigned to markers 1 to 5.
Marker 1 to 5
Marker 1 to 5
Aspect Marker
An aspect marker displays a range in accordance with the specified aspect ratio.
Note
Aspect marker is not displayed in the following cases:
• When there is no signal, unsupported signal, or a channel with "Input Configuration" not set is
selected
• When "H Delay"/"V Delay" is "On"
• When a "Test Pattern" is displayed
• When "Peaking 1" or "Peaking 2" is selected
• When a "Test Pattern" is displayed
• When "Peaking 1" or "Peaking 2" is selected
Enable
Switches the aspect marker On, Off.
On, Off
On, Off
Mask
Switches the mask color. Mask is the blanking area outside the range of the marker.
Black:
Black:
Half (50% gray):
Off: Turns mask off.
Aspect Ratio
Sets the aspect ratio of the aspect marker.
16:9, 15:9, 14:9, 13:9, 4:3, 2.39:1, 2.35:1, 1.896:1, 1.85:1, 1.66:1, Variable
The aspect ratio can be entered as a numeric value when you select "Variable" (0.01:1 increments). The
grayed out slider becomes active and can be used to set the aspect ratio.
1.00:1 to 3.00:1 (1.78:1)
16:9, 15:9, 14:9, 13:9, 4:3, 2.39:1, 2.35:1, 1.896:1, 1.85:1, 1.66:1, Variable
The aspect ratio can be entered as a numeric value when you select "Variable" (0.01:1 increments). The
grayed out slider becomes active and can be used to set the aspect ratio.
1.00:1 to 3.00:1 (1.78:1)
Line
Active when "Black" or "Half" is selected for "Mask". Switches lines on mask On, Off.
On, Off
On, Off
Line Width
Sets the thickness of the aspect marker line.
Thick, Normal, Thin
Thick, Normal, Thin
COP
Y