Audiovox Video DTT7810FM Manuel D’Utilisation

1. Release Button – Press this button to release the shuttle unit.

2. 24 pin Shuttle Interface Connector – Used to connect the shuttle to the DTT7810FM.

4. Power Button – To turn the DTT7810 FM (ON/OFF) 

5. Volume Up / Down Button – Used to increase and decrease the volume level.

6. Channel Up / Down Button – Used to go to the next channel Up or Down.

7. Source Button – Select from the four (4) available sources. DVD > TV > AV > RADIO

8. Bass Boost Button – Used to increase the low 

  bass

9. Alarm Off Button – Used to turn off the alarm. The alarm will automatically turn off after one 

minute

10. Sleep Button – Used to set the DTT7810 sleep mode. The unit will turn OFF in 15, 30, 45, 60, 90, 

or 120 minutes.

11. Dimmer – Used to control the brightness of the LCD display.

12. Snooze – Used to reset the alarm function for 9 minutes.

13. LCD Display Window – The LCD display is used to show the Time, Source selected, and Radio 

Station.

14. IR Receiver – Allows remote control of the DTT7810 and the installed shuttle

(DT102, Dt85 or DT7). 

15. Store Button – Used to set the AM/FM presets into memory.

Clock Set – In Standby mode these buttons are used for setting hours, minutes, and to select

                     from 12 and 24 hour mode.

                        – In operation mode these buttons are used for radio tuning Up and Down.

17. Clock Mode Button  – Used to select the clock or alarm item to be set.

18. Recall Button – Used to recall the radio display and select preset stations.

19. AM / FM Button – Radio Band selector. (FM1, FM2 and AM)

frequency (

) response.

TO AVOID POSSIBLE DAMAGE

TO THIS DEVICE.

DO NOT TOUCH CONNECTOR PINS

WITH METAL OBJECT

WHILE POWER ON.

1

2

3

4

5

6 7 8 9 10 11

131415 16 17 18

19

12