BMW 2004 X5 4.4i SAV Manuel Du Propriétaire
78
n
Check Control
>
TRANS. FAILSAFE PROG
*
>
CHECK BRAKE LININGS
Have the brake pads inspected by
your BMW Sports Activity Vehicle
center, refer to page
Have the brake pads inspected by
your BMW Sports Activity Vehicle
center, refer to page
>
>
ENGINE FAILSAFE PROG
Fault in the engine electronics.
You can continue to drive with
reduced engine output or engine
speed.
Please have the system inspected by
your BMW Sports Activity Vehicle
center.
Fault in the engine electronics.
You can continue to drive with
reduced engine output or engine
speed.
Please have the system inspected by
your BMW Sports Activity Vehicle
center.
Displays after completion of trip
All of the malfunctions registered during
the trip appear consecutively when the
ignition key is turned to position 0.
the trip appear consecutively when the
ignition key is turned to position 0.
The following displays will appear when
appropriate:
appropriate:
>
LIGHTS ON
>
KEY IN IGNITION LOCK
>
CHECK ENGINE OIL LEV
Top up engine oil at the next oppor-
tunity, e.g. while refueling, refer to
page
Top up engine oil at the next oppor-
tunity, e.g. while refueling, refer to
page
.
This display appears when you open
the driver's door after parking the vehi-
cle. A supplementary acoustic signal is
also heard.
the driver's door after parking the vehi-
cle. A supplementary acoustic signal is
also heard.
Status messages remain available with
the CHECK button 3 for a period of
approx. three minutes after the display
goes out and the key is removed from
the ignition lock. If there were multiple
messages, press the CHECK button
repeatedly to view them all in
sequence.
the CHECK button 3 for a period of
approx. three minutes after the display
goes out and the key is removed from
the ignition lock. If there were multiple
messages, press the CHECK button
repeatedly to view them all in
sequence.
Checking the Check Control
Press the CHECK button 3 with the
ignition key in position 2:
CHECK CONTROL OK appears in the
display.
ignition key in position 2:
CHECK CONTROL OK appears in the
display.
No malfunctions are present in the
monitored systems.
monitored systems.
Computer
as well as in
the Owner's Manual for the Onboard
Computer.
Computer.
You can have the Check Control
and computer messages dis-
and computer messages dis-
played in a different language.
<
Online Edition for Part No. 01 41 0 157 897 - © 08/03 BMW AG