Waterpik Technologies Aqua Rite Electronic Chlorine Generator Manuel D’Utilisation

When using this electrical equipment, basic safety precau-

tions should always be followed, including the following:

•

READ AND FOLLOW ALL

INSTRUCTIONS

•

Disconnect all AC power during installation.

•

Warning - To reduce the risk of injury, do not permit
children to use this product unless they are closely
supervised at all times.

•

A green colored terminal marked "Earth Ground" is

located inside the wiring compartment.  To reduce

the risk of electric shock, this terminal must be con-

nected to the grounding means provided in the elec-

tric supply service panel with a continuous copper

wire equivalent in size to the circuit conductors sup-

plying the equipment.

•

One bonding lug for US models (two for Canadian

models) is provided on the external surface.  To

reduce the risk of electric shock, connect the local

common bonding grid in the area of the swimming

pool, spa, or hot tub to these terminals with an in-

sulated or bare copper conductor not smaller than

8 AWG US / 6 AWG Canada.

•

All field installed metal components such as rails,

ladders, drains, or other similar hardware within 3

meters of the pool, spa or hot tub shall be bonded

to the equipment grounding bus with copper con-

ductors not smaller than 8 AWG US / 6 AWG

Canada.

•

SAVE THESE INSTRUCTIONS