Raritan Computer Rackmount Lcd TMCAT17216 Manuel D’Utilisation

 

Chapter 5: System Settings 

 

By default there are no channel names assigned to any connected devices 
on the Selection Menu. Only channel port numbers are available. It is not 
easy to identify the computers or devices without appropriate channel 
names, so you should specify a channel name for each connected 
computer or device. 

 

1.  If you do not see the OSD on the screen, press the hot key twice 

QUICKLY to activate it. The default hot key is Scroll Lock.  

2.  Press F5. The Administration Menu appears.  

3.  Select the third submenu, Channel Configuration. To select the 

submenu, either press 3, or press   to highlight it and then press 
Enter. The Channel Configuration submenu appears.  

4.  If you do not find the channel on the current page, press Page Down 

or Page Up to go to the next or previous page.  

5. Press   or   to highlight the channel name you want to modify, and 

press Enter. The yellow highlight color turns light blue. 

6.  Type a new name up to twelve characters. The highlight color turns 

green when you type. 

7.  Press Enter to confirm the new name. The highlight color turns yellow 

again. 

8.  Repeat Steps 4 to 7 to modify more channel names. 

9.  Press S to save the changes or Esc to quit the current menu or 

submenu.  

  If pressing Esc, the message “Save the changes [Y/N/ESC]” 

appears on the message bar. Press Y to save the changes, N to 
abort the changes, or Esc to return to the current menu or 
submenu.