VIVOTEK VS3102 Manuel D’Utilisation
www.vivotek.com
T:
886-2-22404099
F:
886-2-22404097
13
How to Install
To easily fit into various environments, VisualServer automatically detects the attached interfaces and
configures itself to the best condition. Therefore users need not care whether the connected cameras are
either NTSC or PAL, how to select the network between Ethernet and modem, and whether the Ethernet
speed is 10Mbps or 100 Mbps. If the connected motorized camera is on the support list, users only need
to plug and play without complicated configurations.
VisualServer supports Ethernet and modem interfaces according to the user's existing network. Ethernet
can provide higher bandwidth to achieve the best performance while dial-up network with modem is more
common in current Internet applications. Refer to the related installation section for your network
environment. If both interfaces are available, Ethernet is recommended and will be chosen as the first
priority if Ethernet cable and modem are concurrently attached. Managing to install in the other interface
will automatically clear the previous network settings to start new installation.
In the following content, "user" refers to those who can access VisualServer and "administrator" refers to
the supervisor who has the root password to configure VisualServer in addition to general access.
Administrators should carefully read this manual, especially during installation.