VIVOTEK VS3102 Manuel D’Utilisation

 

 
 
 
 
 

www.vivotek.com

 

  

T: 

886-2-22404099 

  

F: 

886-2-22404097 

 

 
 
 
 
 
 

75

Advanced functions 

Click the button on the configuration page to view the system log file. The content of the file reveals 

useful information about configuration and connection after the system boots up. 

 

Click the button on the configuration page to quickly view the whole system parameter set. The content is 

the same as CONFIG.INI. 

 

Click the button on the configuration page to restore the factory default settings. This means any changes 

made before will be lost and the system will be reset to the initial status when shipped from the factory. 

After confirmation, the system will restart and require the installer program to setup the network. 

 

VisualServer provides a highly customized control support to third-party serial interface devices aside 

from PTZ cameras. That means in addition to setting up a custom camera with PTZF commands, users 

may utilize this mode and introduce a customized homepage to transmit arbitrary user-defined commands 

from the user-side to VisualServer. The third-party device connected to the serial port of VisualServer will 

receive the same command sent by the originator. The user only needs to attach the command in ASCII 

format after the special URL. VisualServer will parse the command and transfer into binary code to send 

out. See the clear data mode serial port driver in the URL commands of VisualServer section for detailed 

description.