Sharp Digital Signage Software Viewer PNSV01 Manuel D’Utilisation
22
Personal firewall settings
If you plan to distribute content over a network, you must free a TCP/IP port for this software to use when the
distribution port is assigned to a personal firewall.
distribution port is assigned to a personal firewall.
If you have installed the Viewer Version, a unique FTP server will be installed, and started as a service.
The default TCP/IP port numbers are 20 and 21. If you change the port number, you must also change
the FTP settings for the controller PC (Fp.80), and the FTP settings for Client Scheduler on the target
PC (Fp.101) to the same port number.
the FTP settings for the controller PC (Fp.80), and the FTP settings for Client Scheduler on the target
PC (Fp.101) to the same port number.
Firewall settings for Status Monitoring Tool (Windows Vista/7 Only)
If using Windows Vista/7, use the following procedure to change these settings.
1. From the Windows Taskbar, click [Start], [Control Panel], [System and Maintenance] (for Windows
1. From the Windows Taskbar, click [Start], [Control Panel], [System and Maintenance] (for Windows
Vista) or [System and Security] (for Windows 7), and then [Administrative Tools].
2. Double-click “Windows Firewall with Advanced Security”.
3. If the [User Account Control] window appears,
click [Continue] (for Windows Vista) or [Yes] (for
Windows 7).
The [Windows Firewall with Advanced Security] dialog box
will appear.
will appear.
4. On the left of the window, click [Inbound Rules], then
click “New Rule” under [Actions] in the pane on the right
of the window.
The [New Inbound Rule Wizard] dialog box will appear.
Installing SHARP Digital Signage Software