Polycom AVAYA DEFINITY LINKPLUS 1725-361300-001 Manuel D’Utilisation
Interface Implementation
PN: 1725-36130-001_E.doc
17
is the sequence equivalent to pressing the corresponding softkey on
the desk set.
The handset function menu default settings are shown on each
corresponding button in the above diagram; these may be changed as
described above in Function Menu Programming. Some of these
functions (Mute, Redial, Forward, etc.) are activated by softkeys or
the desk set.
The handset function menu default settings are shown on each
corresponding button in the above diagram; these may be changed as
described above in Function Menu Programming. Some of these
functions (Mute, Redial, Forward, etc.) are activated by softkeys or
FCN
menu options on the SpectraLink 6000 and SpectraLink
8020/8030 Wireless Telephones.
FCN + 1
MUTE
FCN + 2
XFER
FCN + 3
CONF
FCN + 4
DROP
FCN + 5
LND
FCN + 6
ABDIAL
FCN + 7
VMAIL
FCN + 8
CALLBK
FCN + 9
EXIT MENUS
Program DEFINITY
Each handset must be administered on the DEFINITY so the switch
will recognize the handset and allow access to system facilities and
features. The DEFINITY technician or local system programmer
should perform the necessary programming.
will recognize the handset and allow access to system facilities and
features. The DEFINITY technician or local system programmer
should perform the necessary programming.
Save translations
Before beginning to program the system, the technician may want to
back up the current programming with the save translations
command. This will take time, but will ensure that translations can be
restored if necessary.
back up the current programming with the save translations
command. This will take time, but will ensure that translations can be
restored if necessary.
Program Handsets
Copy settings from a wired set
The easiest way to program the SpectraLink Wireless Telephone on
DEFINITY is to find a wired 8410D station that has settings and
restrictions similar to what is required for the handset, and use the
duplicate station command to copy those settings to a “template”
handset. If there is no 8410D available, find a station that has similar
settings, and use the display or print station command to check the
DEFINITY is to find a wired 8410D station that has settings and
restrictions similar to what is required for the handset, and use the
duplicate station command to copy those settings to a “template”
handset. If there is no 8410D available, find a station that has similar
settings, and use the display or print station command to check the