Tascam DS-M7.1 Manuel D’Utilisation
3 – Connections
18
TASCAM DS-M7.1
Dimmer and mute control connections
A remote box for mute (
MUTE ALL
) and dimmer
control may be made up and used so that the control
of these functions can be carried out from a location
in the listening environment other than the main mix-
ing location.
of these functions can be carried out from a location
in the listening environment other than the main mix-
ing location.
Use non-latching push-to-make switches wired to a
common sleeve ground with the dimmer wired to
ring, and the mute to the tip of a standard 3.5 mm ste-
reo plug. The detection of the change in level, rather
common sleeve ground with the dimmer wired to
ring, and the mute to the tip of a standard 3.5 mm ste-
reo plug. The detection of the change in level, rather
than the open/closed status of the switch triggers the
change in the unit’s status.
change in the unit’s status.
A remote box fitted with these switches can operated
alongside the appropriate front panel switches (it
does not replace them).
alongside the appropriate front panel switches (it
does not replace them).
See “Dimmer level” on page 17, “Dimming the out-
put” on page 21 and “Muting all the channels” on
page 21.
put” on page 21 and “Muting all the channels” on
page 21.
3.5 mm jack
TIP
RING
SLEEVE
MUTE KEY
DIMMER KEY
External non-latching
switches
switches
MUTE ALL
key
key
push
push
Push action only
is detected
is detected
release
release
OFF
OFF
ON
MUTE ALL
status
status