Corsair TWIN2X4096-6400DHX Fascicule
www.corsair.com
The Twin2X4096-6400C5DHX is a 4096MByte matched pair of DDR2 SDRAM DIMMs built using Corsair’s latest high
performance heat sink with Dual-Path Heat Xchange (DHX) technology. This part delivers outstanding performance
in the latest generation of dual-channel DDR2-based motherboards. It has been tested extensively in multiple DDR2
motherboards to ensure compatibility and performance at its rated speed. This memory has been verified to
operate at 800MHz at the low latencies of 5-5-5-18.
TWIN2X4096-6400C5DHX
Those users installing 4GB or more of memory may notice the total amount of available memory being less than 4GB. The amount available depends on the system configuration and the way
the operating system addresses physical memory. Every part is tested in Corsair's factory at 800MHz, but your actual results may vary depending on the overclocking margin of your CPU and
motherboard. Newer motherboards may be used for production test as they become available. Corsair may periodically update the part with newer RAM revisions of same or greater
performance. RAM used on the module may change without notice. © December 2007 Corsair Memory, Inc.
the operating system addresses physical memory. Every part is tested in Corsair's factory at 800MHz, but your actual results may vary depending on the overclocking margin of your CPU and
motherboard. Newer motherboards may be used for production test as they become available. Corsair may periodically update the part with newer RAM revisions of same or greater
performance. RAM used on the module may change without notice. © December 2007 Corsair Memory, Inc.
FEATURES
4096 Megabytes of DDR2 memory
Two matched CM2X2048-6400C5DHX
modules
Unique DHX technology providing maximum
cooling
100% tested at 800MHz in high performance
DDR2 motherboards
Lifetime warranty
TEST SPECS
Each module pair is tested together at 800MHz
Tested and packaged in pairs
Packaged together immediately following
system test
Tested at JEDEC standard latency settings
(5-5-5-18) at 1.8V
SPD programmed at:
JEDEC standard 5-5-5-18 values at
800MHz
Dual-Path Heat Xchange Diagram
• Optimized fins to maximize ambient airflow through the module array
• Extruded aluminum heat sinks to maximize convective heat dissipation
• Dedicated PCB heat sink