Taurus Group DUAL BAY STORAGE S2 Manuel D’Utilisation

  

 

 

 

Your unit may come 

with a pre-installed 

hard drive. Before 

opening such an 

enclosure, please 

read the warranty 

from your vendor 

carefully, as this 

could void your 

warranty. 

 

 

 

The aluminium 

ved 

stand does not 

have to be remo

for drive assembly. 

 

 

 

For RAID 0 and 

RAID 1, drives with 

s 

identical capacitie

are recommended. 

 

 

 

Do not bend the 

thermal sensor! 

1. Remove the four screws at the bottom of the case. 

 

 

2. Push the inner enclosure out, and remove the outer chassis. 

 

3. Install the first hard drive and mount it with two screws on 

each side. 

 

4. Attach the thermal probe with the tape provided to the first 

HDD. Choose a place in between the two drives but without 

damaging the probe when installing the second drive.