TANDBERG 1700 MXP Manuel D’Utilisation
D 13954.01
MAY 2006
MAY 2006
112
TANDBERG 1700
MXP
USER GUIDE
H.323 Settings (I)
Control Panel > Network Settings > LAN Settings
Touch tones
Snapshot
Camera Presets
Lower part of the menu is
explained on the following pages.
CANCEL
Select this icon and press
OK
to leave the menu undoing any
changes.
changes.
RESTORE DEFAULTS
Select this icon and press
OK
to restore the default settings.
SAVE
Select this icon and press
OK
to leave the menu putting
changes into effect.
E.1 ALIAS
This is the E.164 address of the system. The
E.164 address is equivalent to a telephone
number, sometimes combined with access
codes. Valid characters are
E.164 address is equivalent to a telephone
number, sometimes combined with access
codes. Valid characters are
0
–
,
*
and
#
.
When using a gatekeeper, the system will send
a message to the gatekeeper containing both
the E.164 address and the H.323 ID of the
system.
a message to the gatekeeper containing both
the E.164 address and the H.323 ID of the
system.
H.323 ID
The H.323 ID of the system may be specified
here. The System name is used if no H.323 ID
is entered.
here. The System name is used if no H.323 ID
is entered.
H.323 CALL SETUP
Direct
Direct
. An IP-address must be dialled in order
to make a H.323 call. The system will not use a
gatekeeper or CallManager
gatekeeper or CallManager
Gatekeeper
. The system will use a gatekeeper
to make an H.323 call.
CallManager
. The system will use a CallMan-
ager to make a H.323 call.
H.323 PREFIX
When dialing a number prefixed with digits
specified by H.323 Prefix, and with Net: Auto,
an H.323 call will be placed.
specified by H.323 Prefix, and with Net: Auto,
an H.323 call will be placed.
Example:
H.323 Prefix is “555”. Dialling
“55582” with “Net:Auto” will select LAN.
Touch tones
Snapshot
Camera Presets