TANDBERG 1700 MXP Manuel D’Utilisation
D 13954.01
JUNE 2006
JUNE 2006
23
TANDBERG 1700
MXP
USER GUIDE
Navigate to the
Standby now
icon
and click
OK
.
Press
OK
and navigate to the
Standby
icon. Select
Standby
from
the menu and click
OK
.
Standby
Getting Acquainted with the System
About Standby
The system will automatically go to
Standby
Mode
when it is not in use. In
Standby
Mode
, the screen(s) will turn black. It is,
however, still possible to receive incoming
calls.
The
calls.
The
Standby
Mode
of the system should be
enabled if the system is to be left idle.
To Enable Immediate Standby Mode
The system will now enter
Standby
Mode
immediately.
When the system is in
Standby
, pick up the
remote control, or press any of its keys to
activate the system again.
activate the system again.
Navigate to the
Delay Standby for 1
hour
icon and click
OK
.
Press
OK/Menu
and navigate to the
Standby
icon. Select
Standby
from
the menu and click
OK
.
To Enable Delay Standby Mode for 1 Hour
The system will enter
Standby Mode
in 1 hour from now.
Navigate to the
Delay Standby for 3
hours
icon and click
OK
.
Press
OK/Menu
and navigate to the
Standby
icon. Select
Standby
from
the menu and click
OK
.
To Enable Delay Standby Mode for 3 Hours
The system will enter
Standby Mode
in 3 hours from now.
Note!
Standby is not activated by switch-
ing off the power to the monitor(s) (some
systems come with monitors that are not
possible to switch off.).
systems come with monitors that are not
possible to switch off.).
Tip!
If the system is set for
Use screen as Local
PC monitor
, the
Standby
mode will be disabled when
the codec detects a video signal from the
PC. When the PC video signal no longer is de-
tected, the standby mode will be re-enabled.
PC. When the PC video signal no longer is de-
tected, the standby mode will be re-enabled.
Leaving Standby Mode