Sony DHG-HDD250 Manuel D’Utilisation

Instructions for Use of Demo Mode: 

DHG-HDD250 / DHG-HDD500 

 

 

Sony Electronics, Inc. 

 

Page 4 of 8 

 

 

 

When the HD DVR is first powered on, the Auto Setup Welcome screen will 
automatically appear.  If you do not see the below Welcome screen on your TV: 

1.  Check the connections from the HD DVR to the TV 

2.  Check that the correct Format setting for your TV has 

been selected.  Repeatedly press the FORMAT button 
on the remote control or front panel until a format 

setting that is compatible with your TV is displayed on 
the front panel (such as “1080”, “720p”, “SD OUT”, 

etc.) and the below image appears. 

 

 

 

 

 

 

If the HD DVR will be used to receive cable or antenna services, follow the on-screen 

instructions of the Auto Setup and TV Guide

®

 Setup. 

If the HD DVR will only be used to play the pre-recorded content (such as in a retail 

environment with no available cable or antenna connection), you may follow these 
steps to skip the Auto Setup and TV Guide Setup. 

1.  While the above screen is displayed, press the 

SCREEN MODE button on the remote control. 

2.  Enter the numbers “1”, “1”, “2”, “0”.