Quadra-Fire CB1200-B Manuel De Montage

Page de 48
Page  4
7014-082D
September 1, 2008
CB 1200 Pellet Stove 
1
Listing and Code Approvals
A.  Appliance Certification
C.  Glass Specifications
E.  BTU & Efficiency Specifications
This appliance is equipped with 5mm ceramic glass.  Replace 
glass only with 5mm ceramic glass.  Please contact your 
dealer for replacement glass.
This appliance is approved for mobile home installations 
when not installed in a sleeping room and when an outside 
combustion air inlet is provided.  The structural integrity of 
the mobile home floor, ceiling, and walls must be maintained.  
The appliance must be properly grounded to the frame of 
the mobile home and use only Listed pellet vent Class “L” 
or “PL” connector pipe.  A Quadra-Fire Outside Air Kit must 
be installed in a mobile home installation.
B.  Mobile Home Approved
NOTE:  This installation must conform with local codes. In 
the absence of local codes you must comply with the ASTM 
E1509, ULC S627-M93, ULC/ORD-C-1482-M1990, (UM) 
84-HUD 
D.  Electrical Rating
115 VAC, 60 Hz, Start 4.1 Amps, Run 1.1 Amps
*BTU output will vary, depending on the brand of fuel you 
use in your stove.  Consult your Quadra-Fire dealer for 
best results.
NOTE:  Hearth & Home Technologies, manufacturer of 
this appliance, reserves the right to alter its products, 
their specifications and/or price without notice.
Emissions Rating
0.
.
9 grams/hr
*BTU Output
14,000 - 40,000 / hr
Heating Capacity
up to 2,500 sq. ft. depending 
on climate zone
Hopper Capacity
80 lbs
Fuel
Wood Pellets or Shelled Corn
Shipping Weight
349 lbs
Model
CB1200 Pellet Stove
Laboratory
OMNI Test Laboratories, Inc.
Report No.
061-S-21-4
Type
Solid Fuel Room Heater/Pellet Fuel 
BurningType
Standard
ASTM E1509-95, ULC S627-M93 and 
ULC/ORD-C1482-M1990 Room Heater 
Pellet Fuel Burning type and (UM) 84-
HUD, Mobile Home Approved.
State Listing
Colorado, Listed 09-13-05