Nlynx ADSL Ethernet Router Manuel D’Utilisation
Heritage Series ADSL Bridge/ Router
Quick Guide
1
Getting Started
This quick guide provides a quick and easy way to install and configure
your ADSL Ethernet Router to match which do you need.
The major functions of the ADSL Ethernet Router are performed via
Ethernet 10/100Base-T network interface. Your computer has to installed
an Ethernet NIC card and set up the TCP/IP protocol before start to using
your ADSL Ethernet Router.
your ADSL Ethernet Router to match which do you need.
The major functions of the ADSL Ethernet Router are performed via
Ethernet 10/100Base-T network interface. Your computer has to installed
an Ethernet NIC card and set up the TCP/IP protocol before start to using
your ADSL Ethernet Router.
The factory’s default settings of ADSL Ethernet
Router
LAN IP address: 192.168.7.1
VPI: 0
VCI: 32
Encapsulation type: LLC
Connection Type: RFC1483 Bridged
Internal DHCP server: Disabled
Route function: Disabled
NAT function: Disabled
Use DNS, which located in your ISP: Disabled
Web-Configuration
VPI: 0
VCI: 32
Encapsulation type: LLC
Connection Type: RFC1483 Bridged
Internal DHCP server: Disabled
Route function: Disabled
NAT function: Disabled
Use DNS, which located in your ISP: Disabled
Web-Configuration
Login Username: DSL
(upper case)
Password: DSL
(upper case)
Note:
1 You have to change it, which assigned by your ISP, before you used.