Sun Lawn EM-1 Manuel D’Utilisation

Owner’s Manual — Sunlawn EM--1 

 

8 

1.  To start and operate the mower, press and hold down the red 

safety button with one hand, then pull the starting lever back 
toward the handle grip with the other hand. There are similar 
instructions on the handle itself stating: “To operate pull handle 
while depressing safety button.” 

2.  As soon as the mower has started, release the red safety button.  
3.  When the starting lever is released, the motor switches off.  
4.  The mower may be restarted at any time with the same procedure. 

 

 
To obtain a clean cut, push the mower in straight lines (passes) at a 
deliberate walking pace. Overlap the passes to even the cut and to 
avoid any uncut strips. 

 

MOWING USING THE GRASS CATCHER (OPTIONAL ACCESSORY) 
 

The grass catcher collects the clippings as it mows. It attaches at the 
grass catcher hooks on the mower and by the strap to the mower 
handle. Mow using the same procedure as for normal mowing (above).  
 
The roller apron keeps clippings from falling down between the cutting 
bar and the roller thus missing the grass catcher. The roller apron is 
installed just behind the cutting bar using the two screws provided. 
Once the roller apron is installed it is not necessary to remove it 
whether or not you are using the grass catcher. 

 
 
 
 
 
 
 
 

OVERLOADING/OVERHEATING 
 

If the mower blade is blocked, the blade drive will overload and cause 
slippage of the belt, resulting in a loud “brrrrrrr” sound.  

 

1.  Release the starting lever. If there is any foreign object in the blade 

area, it must be removed before proceeding.  

2.  Open the battery box, remove the orange power key, and then 

service the blade area by removing the foreign object.  

 

!

CAUTION