Socket Mobile Socket Go Wi-Fi! E300 Manuel D’Utilisation

 

Use Ping to perform an ICMP ping to another address on the network. Ping 
is useful as a diagnostic tool to establish Layer 3 connectivity to another 
network node. In the continuous ping mode, it can also be used as a site 
survey tool to determine the edge of WLAN range or to look for spots with 
no coverage (dead spots). 
 
1.  In the main screen of Wi-Fi Companion, tap Tools | Utilities | Ping. 

 

2.  The Ping screen will appear. Tap Tools | Configure. 

 

 

3.  In the Configure Ping screen, enter the appropriate settings: 

 

 

 

•  Address: Enter a target address in the form of an IP address or a 

URL that can be resolved by a Domain Name System (DNS). For 
convenience, the last address used is the default, and the drop-down 
list shows prior addresses used. 

•  Size: Select a packet size, from 32 bytes up to 65550. 
•  Content: Select the packet payload data — either All 00, All FF 

(hexadecimal), or Random.   

•  Repeat: Select a repeat number of pings, from a minimum of 5 to a 

maximum of Continuous. 

•  Verify Data: Select either Yes or No. 
•  Tap ok. 

 

CHAPTER 4: WI-FI COMPANION 

41