Electrolux OHV Manuel D’Utilisation

32

33

1)  Check for proper linkage adjustment in 

Section 6.24 before replacing part.

2)  Remove control panel (see section 7.11 )

1)  Remove fuel from fuel tank
2)  Position blower auger end down.
3)  Remove klik pin that secures wheel,
4)  Remove wheel

4)  Remove the two 5/16" hex head screws 

holding control to handle assembly.

5)  Reverse process to install a new linkage 

and perform adjustment in Section 6.24.

3)  Remove retainer spring from both ends of 

linkage.

9)  Remove 5/16" screw that secures trigger to 

handle. 

10)Reverse process to install cable.

7)  Remove spring and pin holding bellcrank.
8)  Unhook cable from bellcrank.  Remove  

5/16" screw  that secures trigger to handle.  
Remove cable.

5)  Remove hardware that secures the power 

steering cover.

6)  Cut wire ties that secure power steering 

cable to handle, noting location of ties.

For Husqvarna Parts Call 606-678-9623 or 606-561-4983

www.mymowerparts.com