Crimestopper Security Products CS-880 OEM Manuel D’Utilisation

Page de 4
 
 
 
+
 
 
 
 
 
 
 
 
CS-880 OEM 
 
ALARM UPGRADE FOR 
FACTORY REMOTE KEYLESS ENTRY SYSTEM 
 
INSTALLATION PRECAUTIONS & WARNINGS 
 
NOTE:  This system does not improve or affect the range of the factory 
remote keyless entry transmitters.  This is an ADD-ON system only.  The 
arm/disarm range of this system will be identical to the factory keyless 
lock/unlock range. 
 
BEFORE BEGINNING, check all vehicle manufacturer cautions and 
warnings regarding electrical service (AIR BAGS, ABS BRAKES, AND 
BATTERY). 
 
DO NOT ROUTE ANY WIRING THAT MAY BECOME ENTANGLED 
with brake, and gas pedals, steering column, or any other moving parts 
in the vehicle. 
 
 
SUGGESTED COMPONENT MOUNTING 
 
CONTROL MODULE: Underdash Mounting: If you are locating the 
control unit underdash, Try to conceal module away from any intruders.  
DO NOT Mount the control unit or wiring harness where they can 
become entangled with moving parts such as brake/gas/clutch 
pedals, or the steering column.
 
 
LED: Mount the red  LED in a visible location on the dashboard or 
console. 
 
Shock Sensor:  Mount the included shock sensor with wire ties to an 
under dash wire harness or fasten a panel. 
 
Disarm/Program Button: Mount the  Override/Program push-button in 
a hidden location easily accessible to the user in case the system must 
be disarmed without the use of the transmitter.  This switch is also used 
to program certain features. 
 
SIREN (CS-880S OEM Model): Mount the siren under the hood to inner 
fender-well or other body surface with the open end facing downward. 
 
TECH SUPPORT 
Mon-Fri 8:00 AM-4:30 PM Pacific Time 
(800) 998-6880