Corinex Global ADSL2+ Manuel D’Utilisation
25
Corinex ADSL2+ Wireless Gateway G Configuration
Corinex ADSL2+ Wireless Gateway G
4.3 Setup tab
The Setup section allows you to create new connections, edit existing connections,
and configure other basic settings. This section is divided into three parts: the first
one is “Quick Start” which helps you with creating a WAN connection. The second
one is “LAN Setup” where you can configure the local area network settings. In the
third part “WAN Setup”, you can set up the modem and the WAN parameters.
and configure other basic settings. This section is divided into three parts: the first
one is “Quick Start” which helps you with creating a WAN connection. The second
one is “LAN Setup” where you can configure the local area network settings. In the
third part “WAN Setup”, you can set up the modem and the WAN parameters.
The following picture shows the setup page.
The page is divided into three subsections – the Quick Start, the LAN and the
WAN configuration.
WAN configuration.
Before configuring the Gateway, there are several concepts that you should be fa-
miliar with on how your new Gateway works. Please take a moment to familiarize
yourself with these concepts, as it should make the configuration much easier.
miliar with on how your new Gateway works. Please take a moment to familiarize
yourself with these concepts, as it should make the configuration much easier.
Wide Area Network connection
On one side of the Gateway there is your Wide Area Network (WAN) connection, also
referred to as a broadband connection. This WAN connection is different for every WAN
operator. Most of the configuration you will perform will be in this area.
referred to as a broadband connection. This WAN connection is different for every WAN
operator. Most of the configuration you will perform will be in this area.