Cub Cadet 59A40003727 Manuel D’Utilisation
25
probleM
possible Cause
soluTion
bucket or boom leaks
down from “Hold”
position
down from “Hold”
position
• Leaks in hydraulic circuits
• Cylinder piston seals leaking
• Remote valve worn or damaged
• Tractor valve worn or damaged
• Remote valve worn or damaged
• Tractor valve worn or damaged
• Tighten loose fittings. Use
thread sealer on pipe threads.
• Repair (if available) or replace.
• Repair.
• Repair.
• Repair.
• Repair.
Cannot lower boom
• Hydraulic couplers not fully engaged.
• Recouple hoses.
loss of bucket Tilt
Control When lever
is pushed Completely
forward
Control When lever
is pushed Completely
forward
• Tractor lever in “Float” position
• Shift control lever from “Float”
position.
Couplers Hard
to Hook up
to Hook up
• Pressure in circuit
• Place control levers in “Float”
when connecting.
boom & bucket
operation does not
Correspond To Control
lever position
operation does not
Correspond To Control
lever position
• Improperly installed hydraulic couplers
• Hoses improperly connected
• Install hydraulic couplers
correctly.
• Connect hoses properly.
excessive Wear on
bucket Cutting edge
and Wear pads
bucket Cutting edge
and Wear pads
• Bucket is tilted too far forward and is riding
on cutting edge.
• Excessive down pressure when cleaning
feedlots and working on concrete.
• Keep bottom of bucket parallel
to ground.
• Use “Float” position on boom
lift control lever.