Fujitsu Siemens Computers X103 SFF Manuel D’Utilisation

 

10

 

VFY-SCED103S, edition 1 

100 V - 125 V

 

► 

Check the voltage setting. 

 

 

The visible value must agree with the local mains voltage: 
115 = 100 V to 127 V 

 

230 = 200 V to 240 V 

If an incorrect mains voltage is set, push the slide switch all the way into the other position 
with a pointed object. 
You may only operate the device, if the voltage for the device is set to the local mains 
voltage.  

 

1

2

 

► 

Connect the power cable to the device (1). 

► 

Plug the power plug into a grounded mains 
outlet (2). 

If the device is integrated into a network, the user and server details as well as the network protocol 
are required during the software installation. Contact your network administrator if you have any 
questions about these settings. 
When you switch on the device for the first time, the supplied software is installed and configured. 
Plan a reasonable amount of time for this, as this process must not be interrupted. 

 

 

Once the installation has been started the device must not be switched off, unless the 
installation has been completed. 
During installation, the device may only be rebooted when you are requested to do so! 
The installation will otherwise not be carried out correctly and the contents of the hard disk 
must be completely restored. 

 

You may need the licence number for Windows during the installation. The licence number is located 
on a sticker on your device.