Fujitsu Siemens Computers X103 SFF Manuel D’Utilisation
System expansions
32
VFY-SCED103S, edition 1
Removing and installing accessible drives
►
►
Remove the drive cage (see "Removing the drive cage").
1
1
1
1
1
1
1
1
1 = Floppy Disk Drive
2 = Optical drive
►
Remove the four screws (1) on the underside of the drive cage.
►
Pull the drive from the front out of the drive cage.
►
Slide the new drive into the drive cage.
►
Fasten the screws (1).
►
►
Installing and removing the hard disk
►
►
Remove the drive cage (see "Removing the drive cage").
1
1
2
►
Remove the two screws (1).
►
Push the hard drive mount as far as it will
go in the direction indicated by the
arrow (2) and take it out of the casing.
go in the direction indicated by the
arrow (2) and take it out of the casing.
►
Disconnect the cables from the hard disk.