Sunrise Global PC-IP SOFTWARE CM100 IP Manuel D’Utilisation
PC-IP Software
User’s Manual
18
Connecting to the Install Profiler
When the PC-IP Software is opened, it automatically opens a
data link with the Install Profiler providing the Install Profiler is
connected to the PC via the serial cable and turned on.
data link with the Install Profiler providing the Install Profiler is
connected to the PC via the serial cable and turned on.
The Install Profiler should be connected to the PC using the
straight-through serial cable provided with the Install Profiler.
Note that this is a straight-through cable and not a null modem
cable.
straight-through serial cable provided with the Install Profiler.
Note that this is a straight-through cable and not a null modem
cable.
Note:
Any other programs that utilize the serial port should
be closed to prevent conflicts between programs
using the same resources.
be closed to prevent conflicts between programs
using the same resources.
Clicking on any of the Setup icons and clicking on Get will check
the connection to the Install Profiler. If the connection is not
established an error message will be displayed (Figure 3-3).
the connection to the Install Profiler. If the connection is not
established an error message will be displayed (Figure 3-3).
Figure 3-3
If a connection is not established, an error message will not occur
until you try to send information to or receive information from
the Install Profiler. If the PC-IP software fails to communicate
with the Install Profiler, an error message is generated.
until you try to send information to or receive information from
the Install Profiler. If the PC-IP software fails to communicate
with the Install Profiler, an error message is generated.