Sunrise Global PC-IP SOFTWARE CM100 IP Manuel D’Utilisation
Chapter 5
Viewing Files
59
Chapter 5
Viewing Files
Figure 5-1
Select a file from the list labeled Install Profiler Files (Figure 5-
1). Select the desired file and then click on Load File. The PC-
IP software will download the file and illuminate the appropriate
viewing icons. The Viewing icons are gray until a file is loaded.
The type of saved file will determine which View icons are
illuminated.
1). Select the desired file and then click on Load File. The PC-
IP software will download the file and illuminate the appropriate
viewing icons. The Viewing icons are gray until a file is loaded.
The type of saved file will determine which View icons are
illuminated.
View Signal Level Meter Saved File
When the Signal Level Meter icon is in color, it means that the
current file is an SLM saved file and it can be viewed and
analyzed by clicking on the icon. When the icon is selected,
a window (Figure 5-2) displays the SLM saved data. The
technician name, type of file and file name and location are
displayed in the upper right area of the screen. The location
indicates the current set of limits criteria used for the Pass/
Fail analysis: Set-Top, Ground Block,and Tap. The display
will automatically configure itself to best display the type of
signal that is being measured according to the Channel Table
data and measurement levels. Figure 5-2 shows a typical
analog channel 2 at a video carrier frequency of 55.25 MHz,
with a carrier level of +9.9 dBmV, an audio carrier level of –
current file is an SLM saved file and it can be viewed and
analyzed by clicking on the icon. When the icon is selected,
a window (Figure 5-2) displays the SLM saved data. The
technician name, type of file and file name and location are
displayed in the upper right area of the screen. The location
indicates the current set of limits criteria used for the Pass/
Fail analysis: Set-Top, Ground Block,and Tap. The display
will automatically configure itself to best display the type of
signal that is being measured according to the Channel Table
data and measurement levels. Figure 5-2 shows a typical
analog channel 2 at a video carrier frequency of 55.25 MHz,
with a carrier level of +9.9 dBmV, an audio carrier level of –