Jeep 50-0284x-015 Series Manuel D’Utilisation

                                                                                                4

 
 
 
 
 
 
 
                             
   
 
8.  Insert rear mounting bracket (item 6 pg. 2) with the 

bent edges downward.  Slide bracket rearward  
between headliner and roof until tabs engage rear 
O.E. roof brace. Align slots in bracket with center 
line scribed on roof. See Figure 4.  Note: There is   
a foam sealer between O.E. braces and roof of 
vehicle. It may require a little force to fully 
engage tabs of bracket if foam is in that area.   

       
 
 
 
 
 
 
 
 

 
 
 
              
 
 
9.   Install front mounting bracket (Item 7 pg. 2) over rear  
     mounting bracket and align slot with centerline scribe 

and edge of bracket with front O.E. brace. Secure 
using (4) four # 10x 1/2" screws. (Item 1 pg.2)                   
See Figure 5. 

 
 
 
 
 

 
 
 
 
 
 
 
 
 
 

 

 

 

FIGURE 5 

FIGURE 4