Citroen C4 Manuel D’Utilisation

Page de 188
IX
IX
113 
IX
IX
D R I V I N G
To stop the function
-  move  the  control  from  position 
"LIM" to position 0.
-  or stop the engine.
The  speed  that  you  chose  is 
memorised.
In  the  event  of  a  malfunction,  a 
message is displayed, accompanied 
by a sound signal and lighting of the 
SERVICE warning lamp.
Consult your CITROËN dealer.
A  floor  mat  not  recom-
mended  by  CITROËN 
risks  sliding  under  the 
accelerator  pedal,  thus 
preventing  you  from  pressing 
past the tight spot.
It  will  then  be  impossible  to 
exit from the desired limitation, 
unless by acting on the steering 
wheel control.
The  driver  must  still  remain 
attentive and in complete control 
of the vehicle.
We  advise  the  driver  to  keep 
their feet close to the pedals.
Note: if during speed limitation, the 
system cannot keep to the maximum 
speed (especially on a steep descent 
or  if  you  accelerate  too  hard)  the 
speed flashes. Adapt your speed as 
necessary.
The  function  will  re-engage  when 
your speed has returned below the 
desired maximum.
Deactivation of the maximum 
speed
Press button 
3.
The  information 
"OFF"  will  appear 
on the instrument panel screen.
This  action  does  not  cancel  the 
memorised maximum speed, which 
remains  displayed  in  zone 
A  of  the 
instrument panel.
Temporary override of the 
maximum speed
You  can  exceed  the  memorised 
maximum  speed  at  any  time  by 
pressing the accelerator pedal hard 
down past the tight spot.
During  the  time  the  limit  speed  is 
being  exceeded,  the  displayed 
speed flashes.
You  have  only  to  release  the 
accelerator  pedal  to  return  below 
the  maximum  speed,  thus  keeping 
the function active.
c4_dd_chap-09_ed05-2008.indd   113
10/07/2008   13:47:15