Citroen C4 Manuel D’Utilisation

Page de 188
60 
IV
IV
A C C E S S
IV
IV
Arming the alarm using the 
remote control
Switch off the ignition and leave the 
vehicle.
Ensure  that  all  doors  and  the  boot 
are closed.
Lock the vehicle using button 
A on 
the remote control.
When  the  alarm  is  armed,  the 
protections  become  active  within 
5 seconds 
(perimeter) 
and 
45 seconds (volumetric).
Your vehicle may be equipped with 
an anti-intrusion alarm.
This ensures:
• Exterior  perimeter  protection  by 
means of detectors on the access 
points (doors, tailgate, bonnet) as 
well as on the electrical supply.
• Interior 
volumetric 
protection 
by  means  of  ultrasonic  sensors 
(detecting  movement  inside  the 
passenger compartment).
  This  can  be  deactivated  using 
control 
1.
The installation also includes a siren 
and  a  warning  lamp 
2  visible  from 
the  outside,  indicating  the  three 
possible alarm statuses:
• Alarm not armed (not on standby), 
warning lamp off.
• Alarm  armed  (on  standby),  the 
warning lamp flashes slowly.
• Alarm  triggered  (signalling  an 
intrusion), the warning lamp flashes 
rapidly  if  the  alarm  is  disarmed 
with a press on button 
B. It stops 
flashing as soon as you switch on 
the ignition.
Note: in the event of a malfunction, 
the warning  lamp 2 comes on con-
tinuously.
ANTI-INTRUSION AlARm
Triggering
Provided  the  alarm  is  armed, 
any  intrusion  triggers  the  siren 
for  30 seconds,  accompanied  by 
the  illumination  of  the  direction 
indicators.
The  alarm  then  reverts  to  armed 
status, but the deployment remains 
memorised  and  is  signalled  by  the 
rapid  flashing  of  the  alarm  warning 
lamp 
2 when you press the unlocking 
button 
B.  The  flashing  stops  when 
you switch on the ignition.
The siren is also triggered if there is 
a cutting of the electrical supply. To 
stop it, restore the electrical supply 
then  give  a  press  on  the  unlocking 
button 
B.
c4_dd_chap-04_ed05-2008.indd   60
10/07/2008   13:41:20