Mocomtech CIM-550 Manuel D’Utilisation
CiM-550 IP Enabled Satellite Modem
Rev. 2
Front Panel Menus
CD/CIM550.IOM
23
4.1.3 L
ED
I
NDICATORS
There are 8 LED indicators. The functions of these indicators are shown in the table
below.
below.
Table 4-1. Front Panel LED Indicators
LED
Color
Condition
Red
A Unit Fault exists (Example: PSU fault)
Orange
No Unit Faults, but a Traffic Fault exists
Unit Status
Green
No Unit Faults, or Traffic Faults
Green
No Tx Traffic Faults
Transmit Traffic
Off
A Tx Traffic fault exists OR the Tx Carrier is in OFF state
Green
No Rx Traffic Faults (demod and Viterbi decoder are
locked, everything is OK)
locked, everything is OK)
Receive Traffic
Off
An Rx Traffic fault exists (the demod may still be OK)
Green
The Unit is On Line, and carrying traffic
On line
Off
The Unit is Off Line (standby) - forced by externally
connected 1:1 or 1:N redundancy system
connected 1:1 or 1:N redundancy system
Orange
There is a Stored Event in the log, which can be viewed
from the front panel, or retrieved via the remote control
interface
from the front panel, or retrieved via the remote control
interface
Stored Event
Off
There are no Stored Events
Orange
The Unit is in Remote Mode - local monitoring is possible,
but no local control
but no local control
Remote
Off
The Unit is in Local Mode - remote monitoring is possible,
but no remote control
but no remote control
Orange
Framing on, EDMAC on, and unit defined as Slave
EDMAC Mode
Off
Either no EDMAC, EDMAC Master, or Transparent mode
is selected
is selected
Orange
A Test Mode is selected (Example: IF Loopback)
Test Mode
Off
There is no Test Mode currently selected
4.1.4 M
ENU
T
REE
The following figures show the menu structure of the CiM-550 front panel menu. The
detailed screens and menus are described in subsequent paragraphs.
detailed screens and menus are described in subsequent paragraphs.