Fujitsu 510 Manuel D’Utilisation

 Using the Point 510 Pen Tablet

Power States

2

The Point 510 pen tablet behaves differently depending on its power state. The pen 
tablet can be Fully On, partially on (Idle, Standby, Suspended), or Fully Off. The pen 
tablet’s behavior for each power state is as follows:

• Fully On

The pen tablet is running and the display screen is on. The pen tablet responds to 
the pen and other input. Power usage is at the normal rate. 

• Idle and Standby

A low-power state. Some functions are off or regulated to conserve power. When 
the pen tablet detects pen or other input, it returns to the Fully On state.

• Suspend Mode

A low-power state. Operation is suspended and the pen tablet is in low power 
usage. Most functions are off to conserve power, and the pen tablet does not 
respond to the pen or other input. Data in programs that were running is stored in 
random access memory (RAM) and power is provided to RAM to keep from 
losing the data. 

• Fully Off

All functions are turned off. The pen tablet does not respond to the pen or other 
input. Power usage is stopped. 

Your Point 510 pen tablet might be set up to enter a low-power state automatically 
after a period of inactivity, to conserve battery power.

Starting the Pen Tablet

2

Start the Point 510 pen tablet by pressing the Power button once. The Point 510 pen 
tablet will start Windows for Workgroups or Windows 95. 

Using the Power Button as a Suspend/Resume Button

2

If the Point 510 pen tablet has the Power button set up for Suspend/Resume operation, 
then after the pen tablet starts, pressing the Power button switches between the 
Suspend mode and Fully On power states.

•

Press the Power button only once when you start the pen 
tablet. Pressing the Power button again after the start-up 
process begins could cause system problems.