Fujitsu 510 Manuel D’Utilisation
3-6
Care and Maintenance
Wireless LAN Signal is Interrupted
3
The Point 510 pen tablet RF transceiver is designed to send and receive a reliable signal
under most conditions. Occasionally, the signal is interrupted. This could happen
when the Point 510 pen tablet is too far from an access point, or the signal is physically
obstructed by factors such as the material in the structure of the building.
under most conditions. Occasionally, the signal is interrupted. This could happen
when the Point 510 pen tablet is too far from an access point, or the signal is physically
obstructed by factors such as the material in the structure of the building.
If the pen tablet pauses transmission and does not appear to be resuming transmission,
try moving the pen tablet away from the immediate area until the signal resumes. If
moving the pen tablet does not solve the transmission problem, or if this problem
typically occurs in a specific location, contact the computer professional who
maintains the Point 510 pen tablets at your site.
try moving the pen tablet away from the immediate area until the signal resumes. If
moving the pen tablet does not solve the transmission problem, or if this problem
typically occurs in a specific location, contact the computer professional who
maintains the Point 510 pen tablets at your site.
Cursor Is Not Tracking Pen
3
If the cursor on the screen is not accurately tracking the pen or appears to be
misaligned with the pen, calibrate the pen. See “Calibrating the Pen” earlier in this
chapter for details.
misaligned with the pen, calibrate the pen. See “Calibrating the Pen” earlier in this
chapter for details.
Audio Volume Too Low
3
If the audio volume on your pen tablet speaker or external headphones is too low,
check the following:
check the following:
• Ensure that the volume level set with the Speaker Volume hotpad is set to an
audible level.
• Ensure that any volume control in your audio program software is set to an
audible level.