CA Technologies R12.5 Manuel D’Utilisation

Enable Debug Mode 
 

To receive debug information, you must enable the debug mode. You can set 
the debug mode in the Windows registry using the Regedt32 editor. By 
default, the debug mode is disabled. 

1.  Run WINNT\SYSTEM32\REGEDT32.exe. 

2.  In the HKEY_LOCAL_MACHINE window, open: 

SOFTWARE\ComputerAssociates\CA ARCserve 
BACKUP\DSAGENT\CURRENTVERSION\AGENT\dbaifmx@ Informix Server 

3.  Double-click Debug.  

The DWORD editor opens. 

4.  Change the debug mode value as follows: 

From: REG_DWORD:0 (disable debug, the default mode) 

To: REG_DWORD:1 (enable debug) 

Important! Be sure to set the key entry back to 0 (disabled) when you have 
finished troubleshooting to prevent the needless consumption of disk space 
and CPU time. 

 

The DLL that defines the location of the agent files is located in the same key 
as the debug setting. This location is defined during installation. 

Important! Do not change this path manually. Change it only through the 
agent setup program. 

1.  Run WINNT\SYSTEM32\REGEDT32.exe. 

2.  In the HKEY_LOCAL_MACHINE window, open: 

SOFTWARE\ComputerAssociates\CA ARCserve 
BACKUP\DSAgent\CurrentVersion\Agent\dbaifmx@ Informix Server 

You will see a statement similar to the following: 

dll:REG_SZ:C:\Program Files\CA\CA ARCserve Backup Agent for 
Informix\dbaifmx.dll 

 

36  Agent for IBM Informix Guide