C. Crane PR-D4VW Manuel D’Utilisation

The

clock can be set either while the radio is on or off. You will need
to go through the steps listed below without stopping for more
than 15 seconds at any given time or you will have to start over.
(Refer to page 4 for Button Identification.)

1) Press and hold the Scan/Set Button for three

seconds. You will hear a beep. The 

and the          symbol will flash on the display.

2) Using the Up/Down Tuning Buttons, select the 

appropriate hour digit and AM or PM.

3) Press the Scan/Set Button again to select the

minutes digits, the 

will flash.

4) Use the Up/Down Buttons to adjust the minutes to the 

appropriate time.

5) You must press the Scan/Set Button again to complete the 

time setting.

There are two different alarm modes on the Sonido Radio. You
can choose to wake up to the radio or to a beep tone. You can
set the alarm with the radio on or off.

1) To wake with the Radio, press and hold the Radio

Alarm button (shown at right) for 2 seconds. The

symbol will flash, you will hear a beep and the 

current alarm time will display.

To wake with the Beep Tone Alarm, press and hold the 
Beep Tone Alarm button (shown at right) for 2 seconds. 
The          symbol will flash, you will hear a beep and the 
current alarm time will display.

SCAN