ASUS WL-HDD Manuel D’Utilisation
2 - Getting Started
ASUS Wireless "WL-HDD" User’s Manual
19
Chapter 2 - Getting Started
4. Select “Use the following...”
IP address: 192.168.1.xxx (xxx
can be any number between 1 and
254 that is not used by another
device except 192.168.1.220 which
is used by the “WL-HDD”)
can be any number between 1 and
254 that is not used by another
device except 192.168.1.220 which
is used by the “WL-HDD”)
Subnet Mask: 255.255.255.0
SSID Settings
The SSID or the network name of the
WLAN adapter must be configured
correctly for proper operation. Click
the LAN icon under “Network and
Dialup Connections” and right-click
to view its Properties. Click
Configure under the General tab.
Then select the Wireless Network
tab. Make sure that the Network Name
is set to “WL-HDD” and click OK.
WLAN adapter must be configured
correctly for proper operation. Click
the LAN icon under “Network and
Dialup Connections” and right-click
to view its Properties. Click
Configure under the General tab.
Then select the Wireless Network
tab. Make sure that the Network Name
is set to “WL-HDD” and click OK.
Note: Disable WEP and set the
SSID to default for any existing
wireless LAN device connected
to your computer.
SSID to default for any existing
wireless LAN device connected
to your computer.
Note: The procedure described here may be slightly different for
various wireless adapter utilities. Refer to the documentation for
your wireless client (notebook or PDA) as well as that for the wire-
less adapter for specific instructions.
various wireless adapter utilities. Refer to the documentation for
your wireless client (notebook or PDA) as well as that for the wire-
less adapter for specific instructions.
When the wireless client is
configured correctly, connection to
the “WL-HDD” should be
automatic.
configured correctly, connection to
the “WL-HDD” should be
automatic.