Antex electronic TriplePlay Multizone Satellite Audio Receiver Manuel D’Utilisation

Page de 16
 
 
TriplePlay Multizone Satellite Audio Receiver    9 
© 2003 Antex Electronics, Inc. 
Blocking Channels 
Using the Parental Control feature, you can block specific 
channels so that can be accessed only with a pass code that you 
define. Parents find this feature useful for preventing their 
children access to specific content. 
To block a channel: 
1.  Press and hold the POWER button to enter SETUP mode. 
2.  Press the CHANNEL down button to highlight “PARENTAL 
CONTROL,” and then press the SELECT button. A screen 
similar to that shown below appears.  
XXXX
ENTER PASSWORD
SRX-3 TriplePlay
Press SELECT to Accept
Preset to Exit
XXXX
ENTER PASSWORD
SRX-3 TriplePlay
Press SELECT to Accept
Preset to Exit
 
“XXXX” will appear for the password.  You must set a 
password (if this is the first time at this menu) or enter a 
previously set password to proceed.  Be careful to use a 
familiar number. Write this number down for future 
reference.   
Pass code: _________________________ 
3.  Enter 4 digits with the numeric buttons or remote, and then 
press SELECT.  (To exit this menu without setting or entering 
the password and return to the previous menu, press the 
PRESET button.) 
After you have entered the password successfully, the 
following menu will appear. 
CHANGE PASSWORD
BLOCK CHANNELS
RETURN
PARENTAL CONTROL
SRX-3 TriplePlay
CHANGE PASSWORD
BLOCK CHANNELS
RETURN
PARENTAL CONTROL
SRX-3 TriplePlay
 
Note that you can change the password by repeating steps 1 
through 3.  
4.  Scroll to highlight “BLOCK CHANNELS”, and then press the 
SELECT button.  A menu similar to that shown below 
appears. 
70    Planet Jazz
BLKd
PARENTAL CONTROL
ZONE 1
SRX-3 TriplePlay
Press SEL to Return
UP/DN to select Channel
LF/RT to change Status
Zone to change Zone
70    Planet Jazz
BLKd
PARENTAL CONTROL
ZONE 1
SRX-3 TriplePlay
Press SEL to Return
UP/DN to select Channel
LF/RT to change Status
Zone to change Zone
 
— 
Use the CHANNEL up/down buttons to scroll to the 
channel you want to block. 
— 
Use the CATEGORY left/right buttons to toggle the status 
between blocked “BLKd” or unblocked “NRML”. 
5.  Block (or unblock) as many channels as you choose. When 
finished, press the SELECT button to return to the default 
display.