Jenn-Air W10136129C Manuel D’Utilisation

Gather the required tools and parts before starting installation.

Read and follow the instructions provided with any tools listed 
here.

Custom Overlay Door Panel—See “Custom Panel Installation 
Instructions,” #8 x 

¹⁄₂" pan head wood screws (8)

■

Adhesive pads (4)

If you plan to install a custom overlay panel, you will need to 
create the panel yourself or consult a qualified cabinetmaker or 
carpenter. 

IMPORTANT: 

■

The thickness of the overlay panel must be 

³⁄₄" (1.91 cm).

■

Overlay panel must not weigh more than 8 lbs (3.62 kg).

■

Overlay panels weighing more than recommended may 
cause damage to your ice maker.

■

Match woodgrain direction with that of adjacent cabinets.

■

Sand panel edges to provide a smooth finish.

■

Use moisture sealer on both sides and all edges of the 
panel to provide moisture protection.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety 
messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

: 

■

Plug into a grounded 3 prong outlet.

■

Do not remove ground prong.

■

Do not use an adapter.

■

Do not use an extension cord.

■

Disconnect power before cleaning.

■

Disconnect power before servicing.

■

Replace all parts and panels before operating.

■

Use two or more people to move and install ice maker.

    

■

Cordless drill

■

Phillips screwdriver

■

Router or planer

■

Pencil

■

Masking tape

■

Tape measure

■

Towel or piece of 
cardboard