Motorola Car Satellite Radio System DSR-6400 Manuel D’Utilisation

Audio1 and Audio2 Menus

Use these menus to customize the back-panel analog audio outputs (Phoenix connectors). Press
the  buttons until the Audio1 or Audio2 menu appears (shown below).

AudioMix Field

Default: Stereo

Important: If the audio input mode is stereo and you are connecting to a mono modulator, you
must set this field to Mono.

This field allows selection of the audio processing options. Press the 4 button until the cursor is

at the AudioMix label, and press ENTER to move into the field. Press the  buttons to display

the options:

Stereo

Stereo output on both left and right channels

Dual Mono

Mono output on both left and right channels that can each be assigned to a
unique language

Mono

Duplicate mono output on both left and right channels

Surround

Enhanced stereo with surround pass-through

Caution: If Dual Mono is selected, a caution screen appears. If Dual Mono is selected and then
changed to another option, the caution screen appears again. This caution message denotes possible
conflicts between this menu and the language selection menus that could mute the audio. By
pressing ENTER (ignoring the caution), the unit changes to Dual Mono, and uses the language
previously selected for Mono (or Stereo) for both left and right channels.

If it is necessary to select a single language for Mono, Dual Mono, or Stereo output, see
"AUD1LANG and AUD2LANG Menus" on page 54.

E Stereo On-Moderate

AUDIO1 AudioMix DialNorm/Compress

E Stereo On-Moderate

AUDIO2 AudioMix DialNorm/Compress

Press E to continue or to stop

CAUTION: Check audio language selection