Brocade Communications Systems Brocade ICX 6650 6650 Manuel D’Utilisation

Sample 802.1X configurations

Sample 802.1X configurations

This section illustrates a sample point-to-point configuration and a sample hub configuration that 
use 802.1X port security.

Point-to-point configuration

 illustrates a sample 802.1X configuration with Clients connected to three ports on the 

Brocade device. In a point-to-point configuration, only one 802.1X Client can be connected to each 
port.

FIGURE 6

 Sample point-to-point 802.1X configuration

Same point-to-point 802.1x configuration

The following commands configure the Brocade device in 

Brocade(config)# aaa authentication dot1x default radius
Brocade(config)# radius-server host 192.168.9.22 auth-port 1812 acct-port 1813 
default key mirabeau dot1x
Brocade(config)# dot1x-enable ethernet 1/2/1 to 1/2/3
Brocade(config-dot1x)# re-authentication
Brocade(config-dot1x)# timeout re-authperiod 2000
Brocade(config-dot1x)# timeout quiet-period 30
Brocade(config-dot1x)# timeout tx-period 60
Brocade(config-dot1x)# maxreq 6
Brocade(config-dot1x)# exit
Brocade(config)# interface ethernet 1/2/1
Brocade(config-if-e10000-1/2/1)# dot1x port-control auto
Brocade(config-if-e10000-1/2/1)# exit

192.168.9.22

e1/2/1

e1/2/2

e1/2/3