Bolex Paillard H16 Reflex 5 Mode D’Emploi
1
Carrying handle
2
Light-tight cover plate (picture above)
3
Retaining clamp for the magazine or cover plate 2
4
Fork for opening the sprocket guides for cameras not
fitted with the slide 9 (drawing above)
fitted with the slide 9 (drawing above)
5
Jotter
6
Adapter bracket for the Bolex exposure meter
7
Film path when using the 400 ft magazine
8
Film rollers
9
Slide for opening the sprocket guides
Some cameras are fitted with the slide 9 which is used to
keep the sprocket guides open—if the film is to be loaded or
unloaded by hand. In this case, it is necessary to open the
sprocket guides and keep them in the open position by push-
ing the slide towards the front of the camera (Fig. 1). The
small fork 4 has the same function but operates from the
front (see Fig. 11 above).
keep the sprocket guides open—if the film is to be loaded or
unloaded by hand. In this case, it is necessary to open the
sprocket guides and keep them in the open position by push-
ing the slide towards the front of the camera (Fig. 1). The
small fork 4 has the same function but operates from the
front (see Fig. 11 above).