Wacom DTF-720 Manuel D’Utilisation

 6  

1 

Pull up on the stand adjustment lever.

    

 

 

 

    

Please hold the stand carefully as 

   

you adjust it to prevent injury or 

   

damage to the product.

2

 Lower the stand carefully.

1

2

This product conforms to the Video Electronics Standard Association’s (VESA) Flat 
Panel Monitor Physical Mounting Interface Standard (FPMPMI). 
This product can be removed from the stand and mounted on such apparatuses as 
a VESA-standard mount arm. In order to do this, M4/0.7 mm screws, which are not 
included with the product, are needed. Use screws that will, at the time of installation, 
penetrate the surface of the product by no more than 15 mm. Use of longer screws 
may result in damage to internal parts of the 
product. 

1

Make sure that both your computer and the  

product are turned off and that all cables are  
disconnected.

2

Place the display unit face down on a flat 
surface. To prevent harm to the front of the 
unit, fi rst spread a cloth or similar material on  
the fl at surface as a cushion.

3

Remove the four screws that hold the stand to 

the unit.  

4

Using four M4/0.7mm screws, securely mount  

the arm or similar apparatus to the back of the 
unit.

5

Connect the cables and save the screws that  

you removed in step 3. 

 

When installing the unit on a mount arm or 
other stand, always follow the directions in 
the instruction booklet for the mount arm or 
stand, as well as the instructions contained 
in this document. Incorrect installation may 
result in the product coming loose and falling,  
possibly causing product failure. 

01_PL720_UZ-0332(C)_En.indd   6

07.11.27   6:56:09 PM