SMART Technologies 710.0026 Manuel D’Utilisation

 

710.0026 R1.2  

       SmarTire LF Initiator Operating Instructions 

 

 

3

 

The SmarTire LF Initiator is a handheld tool designed to provoke data transmissions from SmarTire 
High Pressure Sensors. The tool can be used to assist the installer during:  

 
• 

New Installations – programming sensor ID numbers & vehicle configuration into the 
receiver 

• 

Sensor Replacement - programming new sensor ID numbers into the receiver 

• 

Installation Verification (without moving vehicle) 

• 

Transmitter De-Activation (after removal) 

 
NOTE: The SmarTire LF Initiator is compatible with SmarTire’s low and high pressure 
commercial sensors ONLY. It is not compatible with the low pressure sensors used in 
SmarTire products for passenger vehicles, motorcycles, trailers and tow-behinds. 
 
 

 
Initiate: Press this button to make a sensor transmit its ID number, tire pressure data and tire 
temperature data. This function is used when confirming that sensors are installed in the correct 
wheel locations on a vehicle after system installation. 
 
De-energize: Press this button to de-activate a sensor. This function should only be used when 
sensors are removed from a vehicle. 
 

Initiate Button 

De-Energize Button 

Learn Button 

Battery Cover 

LED Light 

Transmission End 

On / Off Switch 

REFERENCE ONLY