Lopi Answer Wood Stove Manuel Du Propriétaire

3.

 

Place the insert into the fireplace and connect the flue (if using a positive or direct
connection).  Install the top panel and trim following the directions below.

Install the top panel so the two 
tabs insert into the joggle clips on 
the top panel.

Top 
Panel

"L" Bracket

Double-Back 
Tape

Right 
Side 
Trim

Construct the panel trim.  Insert one leg of 
each "L" bracket into the top and side trim 
piece.  Align the trim to form a precise corner, 
then tighten the two set screws with a small 
standard screwdriver.  Slide the trim over the 
panels.  Attach a piece of included double-
back tape to the bottom of each side trim to 
keep it from flaring at the bottom.

Tighten the set screws from the 
back side with a small standard 
screwdriver

"L" Bracket

Right Side 
Trim

Top Trim

AA

AA

AA

AA

AA

AA

Top Trim

1.

With the insert drawn 6" from the fireplace, glue the insulation strip included with the
surround panel kit to the back of the panels using RTV silicon or stove gasket cement.
The insulation should be installed so it overlaps the fireplace opening to form a seal
between the panels and the fireplace face.  Let the silicon or cement dry.

2.

Push the insert into the fireplace, allowing the insulation to form a seal between the
panels and the fireplace.  Use a screwdriver to tuck any exposed insulation behind the
panels.