Beckett AFG 240V Fascicule

Form No. 61283, Printed in the USA

 02/1

1

USA:  R.W. Beckett Corporation  •  ph: (800)645-2876  •  fax: (440)327-1064     |    Canada:  R.W. Beckett Canada Ltd.  •  ph: (800)665-6972  •  fax: (519)763-5656

RESIDENTIAL BURNERS

 

▫

Reduces Investment Up To 65%

 

▫

Reduces Storage Up To 85%

 

▫

Speeds Service Calls

The Beckett Chassis Plan lets you stock a minimum number 
of oil burners and still get maximum installation fl exibility.  The 
chassis represents 90% of the total burner cost, but one chassis 
adapts to all fi ring rates commonly encountered in upgrading and 
replacement jobs.

1. Model AFG Burner Chassis
2. Type of Fuel Unit (single or two-stage)
3. Primary Control

1. Specify type of supports required
2. Add any other items such as spare parts, related   
    controls, valves, etc.

Product Sheet 

 

◦ Welded Relay Protection

 

◦ Limited Recycle

 

◦ Limited Reset

 

◦ 3 Status Lights

 

◦ 15 Second Lockout Time

 

◦ Disable Function

 

◦ Communication Ports (2)

 

◦ Technician Pump Priming Mode

 

◦ Interrupted or Intermittent Duty Ignition

 

◦ Valve-On Delay / Motor-Off Delay 

  (Field programmable with Beckett add-on Display)

 

◦ Thermostat / Operating  (if applicable) and Limit Control 

Compatible

• Integrated solenoid (50/60 Hz) valve.

• Higher capacity design delivers up to 3 

GPH at 100psi on the AFG burner.

• The CleanCut has fewer moving parts 

and reduces motor load.

240V PowerLight Beckett Igniter
•  Electrodes last approx. 50% longer.
•  Higher output voltage for reliable ignition.
• Approximately 75% lower input amps.

• Lower amp draw & cooler operation.

• Delivers more power with the PSC 

design (permanent split capacitor).

• Proven durability after 10 years of high 

reliability in the fi eld.

• Ball bearings for longer life.

• Reduces near-burner air and 

component noise.

• Enhances burner appearance.

• Easy to use knockout and adapter kit 

when ducted air is required.

The Beckett GeniSys

TM

 Advanced Burner Control is a 208/240 

Vac, 50/60 Hz primary safety control for residential and light 
commercial oil burners used in boiler, furnace, and water 
heater applications having fi ring rates less than 20 GPH.  
The GeniSys is used with a suitable cad cell fl ame sensor 
to control the oil burner motor, igniter, and optional solenoid 
valve.  It has 24 Vac thermostat terminals (if applicable) 
compatible with both mechanical and many power stealing 
thermostats.  It can also provide interrupted or intermittent 
duty ignition.

de