BMW 2006 325i Sedan Manuel Du Propriétaire
47
Acceleration assistant
The acceleration assistant provides for optimal,
racing-style acceleration when starting off on a
non-slippery surface.
racing-style acceleration when starting off on a
non-slippery surface.
Do not use the acceleration assistant too
frequently, otherwise components could
frequently, otherwise components could
wear prematurely.
<
1.
Activate Dynamic Driving Control.
2.
Deactivate DSC, refer to page
.
3.
Quickly depress the accelerator pedal all
the way: kick-down. The optimal engine
speed for pulling away is achieved.
the way: kick-down. The optimal engine
speed for pulling away is achieved.
To maintain driving stability, reactivate
DSC afterward.
DSC afterward.
<
Automatic transmission with
Steptronic*
In addition to fully automatic operation, you can
also manually shift with the Steptronic, refer to
page
also manually shift with the Steptronic, refer to
page
Vehicle parking
To prevent the vehicle from rolling,
always select position P and apply the
always select position P and apply the
handbrake before leaving the vehicle with the
engine running.
engine running.
<
Disengaging the remote control
In order to remove the remote control from the
ignition lock, you must first move the selector
lever to position P and switch off the engine:
interlock.
ignition lock, you must first move the selector
lever to position P and switch off the engine:
interlock.
Selector lever positions
P R N D M/S + –
Displays in the instrument cluster
P R N D DS M1 to M6
The selector lever position is displayed, or the
current gear in the manual mode.
The selector lever position is displayed, or the
current gear in the manual mode.
Changing selector lever positions
>
With the ignition switched on or the engine
running, the selector lever can be moved
out of position P: interlock.
running, the selector lever can be moved
out of position P: interlock.
>
Before moving the lever away from P or N
with the vehicle stationary, first depress the
brake; otherwise the selector lever will
refuse to move: shiftlock.
with the vehicle stationary, first depress the
brake; otherwise the selector lever will
refuse to move: shiftlock.
To prevent the vehicle from creeping
after you select a driving position,
after you select a driving position,
depress the brake until you are ready to
start.
start.
<
A lock prevents you from inadvertently engag-
ing selector lever positions R and P. To cancel
the lock, press the button on the front of the
selector lever, refer to arrow.
ing selector lever positions R and P. To cancel
the lock, press the button on the front of the
selector lever, refer to arrow.
P Park
Select only when the vehicle is stationary. The
rear wheels are locked.
rear wheels are locked.
Online Edition for Part-No. 01 41 0 012 351 - © 03/06 BMW AG