Movincool CLASSICPLUS14 Mode D’Emploi

The Classic Plus 14 and Classic Plus 26 can be operated in two modes, FAN 

ONLY and COOL. When in FAN ONLY mode, the unit circulates the surrounding 

air. When in COOL mode, the compressor is operated and cool air is circulated.
1. COOL Mode

Once the compressor has been disengaged for more than 120 sec, the unit 

operates in FAN ONLY mode for approximately 5 sec before the compressor 

re-engages. (Time delay setting is around 120 sec.)

The room temperature thermistor monitors the inlet temperature versus set 

point temperature and switches the unit automatically between COOL and 

FAN ONLY modes.

The fan mode control DIP switch determines whether the fan continues to 

operate or stop when the compressor cycles off. (Set point temperature equals 

inlet air or room temperature.) The unit has been preset at the factory for 

continuous fan operation.
Note: If you want to change the fan mode operation (from OPERATE to 

The temperature scale display DIP switch changes the temperature(s) that are 

displayed to either °C or °F. The unit has been preset from the factory to 

display the temperature(s) in °F.
Note: If you want to change the temperature scale display (from °F to °C),