Monogram ZGP486DRSS Fiche Technique
For answers to your Monogram,
®
GE Profile
™
or
GE
®
appliance questions, visit our website at
geappliances.com or call GE Answer Center
®
service, 800.626.2000.
130565
Specification Created 12/10
Listed by
Underwriters
Laboratories
ZGP486NDRSS (Natural Gas)
ZGP486LDRSS (Liquid Propane)
GE Monogram
®
48" All-Gas Professional Range with 6 Burners and Griddle
Dimensions and Installation Information (in inches)
Professional ranges offer a number of choices in size and
cooktop configurations.
All Professional Ranges are factory set for natural or liquid
propane gas. The correct model should be ordered for the
installation situation.
cooktop configurations.
All Professional Ranges are factory set for natural or liquid
propane gas. The correct model should be ordered for the
installation situation.
Note: Conversion kits are included with the range if the wrong
gas type was ordered. High Altitude kit, WB28K10553 for
operation above 6,000 feet (for Natural and LP gas models), is
also available. The kits must be installed by a qualified service
technician at additional cost.
Installation Information
Before installing, consult installation instructions packed with
product or online at Monogram.com for current dimensional
data.
A suitable 48" or wider vent hood is required for installation
over ranges with a grill and recommended for all other
ranges.
gas type was ordered. High Altitude kit, WB28K10553 for
operation above 6,000 feet (for Natural and LP gas models), is
also available. The kits must be installed by a qualified service
technician at additional cost.
Installation Information
Before installing, consult installation instructions packed with
product or online at Monogram.com for current dimensional
data.
A suitable 48" or wider vent hood is required for installation
over ranges with a grill and recommended for all other
ranges.
Advance Planning
Refer to dimensional drawings
for appropriate placement and
necessary clearances when planning
the installation.
for appropriate placement and
necessary clearances when planning
the installation.
• Working areas adjacent to the
range should have 18" minimum
clearance between countertop and
cabinet bottom.
clearance between countertop and
cabinet bottom.
• Clearance between range and side
wall or combustible material must
be at least 12" on each side.
be at least 12" on each side.
• Installation must conform with
local codes. In the absence of local
codes, the range must comply with
the National Fuel Gas Code, ANSI
Z223.1-1990.
codes, the range must comply with
the National Fuel Gas Code, ANSI
Z223.1-1990.
3-1/4”
to 4-3/4”
Toekick/
Leg Height
Countertop
to Cooking
Surface
Depth
to Front
of Door
28-1/4”
1-1/2”
47-7/8”
Width
35-1/4”
to
36-3/4”
Height